PRODUCTS → DOOR & DRAWER FRONTS → BUILD YOUR OWN MDF DOOR
Build Your Own MDF Door
One-piece high-density MDF doors, painted or thermofoil, cut on our CNC to your design. Pick the frame, profiles, panel and edge — every combination shown is one we can build, and a 10" × 16" sample is cut for approval before your order runs.
Painted & Thermofoil Doors
One-piece high-density MDF, cut on our CNC with Royce//Ayr profile knives. Choose a finish, a frame, an inside profile, a panel and an outside edge. The drawing updates as you go, and the section shows exactly what the cutter leaves at the depth you pick.
Due to current market conditions, our thermofoil supplier is streamlining its colour range. Availability of every thermofoil colour is confirmed at time of quoting.
Starts you from one of our standard doors. Your finish and door size stay as you set them.
For the drawing and fit check. Every door on an order is cut to its own size — the summary shows the smallest door and drawer front your design can be made at.
On frames 2" and wider, any door or drawer front 7" or less in width or height is made with half-width stiles or rails across that dimension (e.g. 2 1/2" frame → 1 1/4").
How deep the inside profile and panel are cut. Maximum 5/16" so every door keeps 7/16" of material behind the panel for our threaded-insert fronts. The pictures below redraw at the depth you pick.
Pictures show the profile cut at your chosen depth. Gold dashes mark the part of the cutter that sits above the face at that depth — that detail will not appear on the door.
Outside edges are cut at their own fixed depth and are not affected by step 4.
Custom-configured doors carry a setup fee, and a 10" × 16" sample is always cut for your approval before the order runs. Save the PDF and take it to your MJR retailer for pricing and ordering.
Not sure what you need?
Send us your project and we'll spec it for you — free.