Products → Panels & Fillers → Flat Valance Panel
Flat Valance Panel
A finished panel that caps the underside of a run of wall cabinets — hides the box bottoms and the seams between them, and carries your under-cabinet lighting if you want it to.
DRAG TO ROTATE · SCROLL TO ZOOM
Flat valance, shown at 60" × 12". A plain finished panel in your door finish — see all finishes.
Light valance, shown at 60" × 12". Underside: the channel for the LED housing. Top: the wiring channels along the back and down each end, hidden by the cabinet. Switch to Underside to see the light channel.
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
14" deep × ¾" thick · length to suit the run, up to 95"
SIZING
Depth14" standard — out to the front of the doors, with room to scribe
LengthCut to your run, up to 95"
Thickness¾"
Size restrictions may apply for certain finishes — we'll confirm at quote.
TWO VERSIONS
Flat valance — a plain finished panel that covers the underside of your wall cabinets.
Light valance — the same panel with a channel cut in the underside for an LED tape housing, and wiring channels on top, hidden by the cabinet.
CUSTOM SIZING
✓ Cut to the ordered size
✓ Order it deeper to scribe to an out-of-square wall
✓ Need something outside these sizes? We build custom all the time — ask your dealer and we'll confirm what's possible.
HOW IT'S BUILT
· ¾" in your door finish — MDF for painted, veneer for stained, melamine or thermofoil as chosen
· Painted: finished on all six sides. Melamine and thermofoil: edges banded to match
· Finished face down — the side you see from the counter
· 45° corner cabinets have their own valance
LIGHT VALANCE — THE WIRE STAYS OUT OF SIGHT
01 Out of the wall. The wire comes out behind the cabinet; the exact spot isn't critical.
02 Through the cabinet. It runs down the back and through a hole in the cabinet bottom.
03 Into the valance. Channels on top of the valance carry it to the light.
Lighting not supplied: the housing, LED tape, wire and driver come from your electrician or lighting retailer. The channel fits the Tamlite SM120717-1.2MK-AL housing (12 mm channel series).
Blind corner cabinets: the light stops short of the wall.
HOW TO ORDER
One per run — tell us the cabinets it covers, and flat or light
Ships flat. Install: screw up through the panel into the cabinet bottoms (screws not supplied). Step-by-step: Valance Panels assembly sheet & video (ASM-L01) →
FEATURE SHEET
Flat and light valance, how the wire is routed, and what lighting fits.
Make it yours
FINISH CHOICES
Painted, stained, thermofoil & melamine → Explore Finishes
Standard is the same finish as your doors, so the underside of the run reads as part of the cabinetry rather than a row of box bottoms. Flat and light valances come in every finish.
Also available: Wall End Panel · Flat Panel
Not sure what you need?
Send us your project and we'll spec it for you — free.