Products → Panels & Fillers → ¾" Filler
¾" Filler
A flat ¾" spacer strip in box material — set between two cabinets of different depth so a drawer or door never rubs the panel beside it. Base, wall or tall height.
DRAG TO ROTATE · SCROLL TO ZOOM
Shown at base height, 30½". Supplied in your cabinet box colour — see box finishes.
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
5" W × ¾" · height matches the cabinet it sits beside
SIZE RANGE
Width5" standard
HeightTo match — base to the cabinet height above the toe kick (30½" at the standard 34½"), wall and tall to the cabinet height
Thickness¾"
One item for all three families — tell us which cabinet it goes beside and we cut the height to suit.
CUSTOM SIZING
✓ Cut to the ordered height
✓ Order it longer to scribe on site
✓ Need a different width? We build custom all the time — ask your dealer and we'll confirm what's possible.
HOW IT'S BUILT
· ¾" cabinet box material — melamine in the same colour as your boxes
· Front edge banded to match the cabinet edge banding
· Top and bottom edges banded, typically white
· Flat strip, no profile — it sits between cabinets, not on show
Where it goes: between a cabinet and a deeper tall cabinet or finished panel. The ¾" stand-off gives the drawers and doors room to open without rubbing the neighbour.
HOW TO ORDER
One per gap — tell us the two cabinets it sits between
Ships flat. Install: screw through from inside the cabinet (screws not supplied).
FEATURE SHEET
Where each piece goes, toe kick and filler sizes, and the install video.
Make it yours
FINISH
Any of our box finish selections → See melamine colours
The filler comes in your cabinet box colour so the gap disappears into the run. Need a filler that shows — at a wall, or on a finished end? That's a profiled filler in your door style: see the Base, Wall and Tall Filler pages.
Not sure what you need?
Send us your project and we'll spec it for you — free.