Products → Base Cabinets → 1 Door 1 Drawer Base
1 Door 1 Drawer Base Cabinet
A drawer on top, a door below — the everyday base for the narrow runs beside stoves, sinks, and dishwashers.
DRAG TO ROTATE · SCROLL TO ZOOM
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Height 34.5" · Depth 24"
SIZE RANGE
Width12"–24"
Height20"–42"
Depth12"–42"
Heights under 34.5" may affect pullout and insert compatibility.
Under 12" deep the drawer won’t fit; deeper than 24" leaves dead space behind the drawer, inserts and pullouts.
VANITY USE
✓ Yes — order it as a vanity at any size in the range above. Our standard vanity is 32.5" high × 21" deep.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· 1 door front and 1 drawer front with bumper pads
· 1 Richelieu Axial soft-close drawer — 84 mm (3⅜") × 550 mm (22"), white
· 1 adjustable shelf
· 2 Blum soft-close INSERTA hinges and mounting plates
· 4 shelf clips
· Pre-installed connectors and assembly screws
· One-page instruction sheet
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door and drawer fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Adjustable levelling feet — for 4"–4½" toe kick heights (other heights limited, by special request)
+ Hinge side — left or right
+ Extra adjustable shelves
+ Fixed shelves in place of adjustable
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Toe kick to match
+ Toe kick notch removed — square-cut rectangular side panel
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door and drawer fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Made by MJR · fits cabinet width
+ Inner drawers behind the door · see Drawer System
Third-party
Each insert also has height and depth limits — see its page. We confirm fit once you choose one. Availability and lead time on third-party inserts vary and are confirmed when you select one.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
DRAWER SYSTEM
Richelieu Axial — soft-close metal drawers
Slim 13 mm double-wall panels, gear-driven soft-close, three-way adjustment, 88 lb load rating. KCMA certified with Richelieu’s lifetime warranty.
· Included: 1 drawer — 84 mm (3⅜") height × 550 mm (22") length, white
· Length sized to cabinet depth — 550 mm (22") at 24" deep
· Optional inner drawers behind the door: 167 mm (6 9/16") standard; 84 mm (3⅜") and 199 mm (7⅞") also offered
· Number and spacing of inner drawers set at quote, to suit the cabinet
· A 1" spacer on the hinge side clears the door — no hinge change
· White standard; also available in dark grey and silver
· Prefer another brand? Other drawer systems available on request
Not sure what you need?
Send us your project and we'll spec it for you — free.