Products → Base Cabinets → 45° Corner Base
45° Corner Base Cabinet
Turns the corner with a single angled door — full-depth storage where two runs meet, without a blind spot.
DRAG TO ROTATE · SCROLL TO ZOOM
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
36" × 36" footprint · Height 34.5"
SIZE RANGE
Footprint33"–42" each side, wall to wall
Height20"–42"
Heights under 30" include one adjustable shelf instead of two.
VANITY USE
✓ Yes — order it as a vanity at any size in the range above. Our standard vanity is 32.5" high × 21" deep.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· 1 angled door front with bumper pads
· 2 adjustable shelves (1 under 30" tall)
· 2 Blum soft-close INSERTA hinges and mounting plates (3 on doors over 35" tall)
· 4 shelf clips per shelf
· Pre-installed connectors and assembly screws
· One-page instruction sheet
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Adjustable levelling feet — for 4"–4½" toe kick heights (other heights limited, by special request)
+ Hinge side — left or right
+ Extra adjustable shelves
+ Fixed shelves in place of adjustable
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Toe kick to match
+ Toe kick notch removed — square-cut rectangular side panel
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Third-party
Not every corner insert suits every cabinet — we confirm fit once you choose one. Availability and lead time on third-party inserts vary and are confirmed when you select one.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
Not sure what you need?
Send us your project and we'll spec it for you — free.