Products → Panels & Fillers → Finished Filler
Finished Filler
The strip that closes the gap between a cabinet and the wall — 3⅞" wide in your door finish, three stock lengths for base, wall and tall, scribed and cut to fit on site.
DRAG TO ROTATE · SCROLL TO ZOOM
Shown at the 60" wall length. Supplied in the same finish as your doors — see all finishes.
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
3⅞" W × ¾" · three stock lengths, cut to fit on site
STOCK LENGTHS
Base36" — base cabinets to 36" tall
Wall60" — wall cabinets to 60" tall
Tall95" — tall cabinets to 95"
Each length covers the cabinets below it; a cabinet taller than the stock length simply takes the next size up and is cut down on site.
Cabinets over 95" tall get a filler cut to the oversize height — the three lengths above are what we stock.
CUSTOM SIZING
✓ Trim to height and scribe to the wall on site
✓ Wider than 3⅞"? Order a Flat Panel and rip it to size
✓ Need something different? We build custom all the time — ask your dealer and we'll confirm what's possible.
HOW IT'S BUILT
· ¾" in the same finish as your doors — painted, stained, thermofoil or melamine
· Painted: finished on all six sides, so the scribed edge can be touched up
· Melamine and thermofoil: top and bottom edges banded to match
· Mounted flush with the cabinet edge or flush with the doors — your choice
· Screwed from inside the cabinet after scribing — no fasteners on the show face (screws not supplied)
Where it goes: where a run meets a wall, so doors and drawers clear the wall and trim, and the gap is closed in the same finish as the fronts. For a ¾" stand-off beside a deeper cabinet or panel, use the ¾" Filler instead.
HOW TO ORDER
One per wall the run meets — tell us the cabinet it sits beside and we pick the length
Ships flat. Install: scribe to the wall, trim to height, screw through from inside the cabinet. For painted kitchens we can supply silicone tinted with the same paint for the small gaps.
FEATURE SHEET
Where each piece goes, toe kick and filler sizes, and the install video.
Make it yours
FINISH CHOICES
Painted, stained, thermofoil & melamine → Explore Finishes
Ordered in the same finish as your doors, the filler reads as part of the run. It's a flat strip, not a profiled one — at 3⅞" there's no room for a frame and recess.
Not sure what you need?
Send us your project and we'll spec it for you — free.