Products → Vanity Cabinets → Floating Vanity Open
Floating Vanity Open Cabinet
Wall-hung vanity with a fixed false front and an open bay below — the lightest look in the line, with room underneath for baskets or a towel shelf.
DRAG TO ROTATE · SCROLL TO ZOOM
The false front takes any of our door profiles and finishes — see all door styles.
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Height 20" · Depth 21" · wall-hung, no toe kick — mount at the height you want
SIZE RANGE
Width24"–36"
Height16"–24"
Depth18"–21"
The false front has a ¼" reveal at the top.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· One fixed false front
· Box front panel behind the false front, with connectors fitted to attach it
· Open bay below — no door, no drawer, no shelf
· Full top for rigidity — sink cut-out made on site to suit your sink
· Full back panel — cut on site for supply lines and drain
· Pre-installed connectors and assembly screws
· One-page instruction sheet
Wall mounting: fastens straight through the back nailers into the wall studs with 3" structural screws (not included) — the case itself carries the load, no separate hanging rail needed. Tested in our shop.
The open bay is finished on the inside like a shelf — the plumbing sits behind the false front, above the opening.
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
The false front always ships separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Shelf in the open bay — fixed or adjustable
+ Finished interior
+ Finished end panels
+ Finished bottom — it’s visible on a wall-hung cabinet
+ Box finish — any of our box finish selections
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
FRONT & FINISH CHOICES
6 front profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
WANT THE DRAWER?
Same cabinet with a U-shaped soft-close drawer in the lower bay — see the Floating Vanity 1 Drawer →
Not sure what you need?
Send us your project and we'll spec it for you — free.