Products → Tall Cabinets → Tall Refrigerator — Dividers
Tall Refrigerator Cabinet — Dividers
The fridge surround with vertical dividers above — baking sheets, trays, and cutting boards stored on edge where they're easy to grab.
DRAG TO ROTATE · SCROLL TO ZOOM
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Depth 24" · Fridge opening 71" high · Height to suit your ceiling
SIZE RANGE
Width25"–42"
Height83"–116"
Depth24"–40"
Appliance opening: width = cabinet width − 1½" · depth = cabinet depth − 1½" · height 71" standard. Check your fridge’s installation specs and size the cabinet to suit.
Cabinets wider than 36" can sag over time — the fixed shelf above the opening is reinforced for this cabinet.
Doors have a 1/16" reveal at the top and sit flush at the bottom.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· A pair of door fronts above the fridge, with bumper pads
· Open fridge bay — no bottom, sized to the appliance
· Reinforced fixed shelf above the fridge opening
· 2 vertical dividers in the upper section — three tray slots (more or fewer on request)
· Blum soft-close INSERTA hinges and mounting plates, per door — 2 up to 35", 3 for 36"–47"
· Pre-installed connectors with interior cover caps, and assembly screws
· One-page instruction sheet
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Fridge opening height — 71" standard, sized to your appliance
+ Number of vertical dividers — 2 standard
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
Not sure what you need?
Send us your project and we'll spec it for you — free.