Products → Tall Cabinets → Tall Wall Oven 2 Drawer
Tall Wall Oven 2 Drawer Cabinet
Built around your wall oven — a reinforced support structure carries the weight, two drawers below, two-door storage above.
DRAG TO ROTATE · SCROLL TO ZOOM
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Oven opening sized to your appliance · Height to suit your ceiling
SIZE RANGE
Width20"–36"
Height83"–116"
Depth25"–36"
The oven opening is built to your oven’s cutout specs. Flat trim panels above and below the opening are cut on site to fit the oven flange.
The doors above the oven can be divided in most configurations — you choose where the split sits, and a fixed shelf goes at the split.
Fronts have a 1/16" reveal at the top and sit flush at the bottom.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· A pair of door fronts above (two pairs when divided) and 2 full-width drawer fronts below, with bumper pads
· Flat trim panels above and below the oven opening, in the door finish
· 2 Richelieu Axial soft-close drawers — top 84 mm (3⅜"), bottom 167 mm (6 9/16"), white, length sized to the cabinet depth
· Reinforced support structure under the oven
· Adjustable shelves in the door section, 4 shelf clips per shelf — tell us how many you want
· Blum soft-close INSERTA hinges and mounting plates, per door — 2 up to 35", 3 for 36"–47"
· Pre-installed connectors with interior cover caps, and assembly screws
· One-page instruction sheet
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door and drawer fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Adjustable levelling feet — for 4"–4½" toe kick heights (other heights limited, by special request)
+ Oven opening — built to your oven’s cutout specs
+ Divided doors — split set to suit your layout
+ Extra adjustable shelves
+ Fixed shelves
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Toe kick to match
+ Toe kick notch removed — square-cut rectangular side panel
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door and drawer fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Made by MJR
+ Cutlery tray insert — top drawer
Drawer organizers
Third-party
Organizers are sized to the drawer — we confirm fit once you choose one. Availability and lead time on third-party items vary and are confirmed when you select one.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
DRAWER SYSTEM
Richelieu Axial — soft-close metal drawers
Slim 13 mm double-wall panels, gear-driven soft-close, three-way adjustment, 88 lb load rating. KCMA certified with Richelieu’s lifetime warranty.
· Included: 2 full-width drawers — top 84 mm (3⅜"), bottom 167 mm (6 9/16"), white
· Length sized to cabinet depth
· White standard; also available in dark grey and silver
· Prefer another brand? Other drawer systems available on request
Not sure what you need?
Send us your project and we'll spec it for you — free.