Products → Vanity Cabinets → Vanity Wall 2 Door
Vanity Wall 2 Door Cabinet
Wide, shallow bathroom storage — two doors on an open interior with two full-width adjustable shelves, 10" deep to stay clear of the sink.
DRAG TO ROTATE · SCROLL TO ZOOM
Shown with our 45° Shaker door profile. Every door style and finish is available on this cabinet — see all door styles.
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Depth 10" · Height 36"
SIZE RANGE
Width22"–36"
Height20"–48"
Depth5"–15"
Shelves scale with height: under 24" none · 24"–29¾" one · 30"–41¾" two · 42"+ three. More can be added to any size.
The doors can be divided on request — a fixed shelf is added at the door seam.
Doors are ⅛" shorter than the box — a 1/16" reveal at the top and bottom.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· Two door fronts with bumper pads (four when divided)
· Open interior — no centre partition
· Full-width adjustable shelves to suit the height (see above), 4 shelf clips per shelf
· Blum soft-close INSERTA hinges and mounting plates, per door — 2 up to 35", 3 for 36"–47", 4 at 48" door height
· Pre-installed connectors with interior cover caps, and assembly screws
· One-page instruction sheet
Mounts with 3" structural screws through the back and nailers into the wall studs — no hanging rails needed. Mounting screws not included.
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Soft-close metal drawer systems
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Extra adjustable shelves
+ Fixed shelves
+ Divided doors — fixed shelf added at the door seam
+ Finished bottom with painted cover caps
+ Under-cabinet light valance
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Third-party
Wall-cabinet inserts depend on the cabinet’s depth and height — we confirm fit once you choose one. Availability and lead time on third-party inserts vary and are confirmed when you select one.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
Not sure what you need?
Send us your project and we'll spec it for you — free.