Products → Wall Cabinets → Wall Blind Corner
Wall Blind Corner Cabinet
The straight-run upper corner — one door, a blind panel into the corner, and the space behind it still yours.
DRAG TO ROTATE · SCROLL TO ZOOM
example door style shown is the 45 degree shaker profile
STANDARD DIMENSIONS
Depth 13" · Height to suit your project
SIZE RANGE
Width26"–36"
Height12"–72"
Depth5"–36"
At 26" the door front is narrow — go wider where space allows.
Depths over 18" may need a side panel running down to the countertop or floor for support — we’ll confirm at quote.
Heights over 60" automatically get divided doors, and doors can be divided at any height on request. Wherever doors are divided, a fixed shelf is added at the door seam.
Shelves scale with height: under 24" none · 24"–29¾" one · 30"–41¾" two · 42"+ three. More can be added to any size.
The door is ⅛" shorter than the box — a 1/16" reveal at the top and bottom.
CUSTOM SIZING
✓ Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
· One door front with bumper pads (two when divided)
· Blind front panel into the corner — the door hinges to it; finished in the door or box finish
· Adjustable shelves to suit the height (see above), 4 shelf clips per shelf
· Blum soft-close INSERTA hinges and mounting plates — 2 up to 35", 3 for 36"–47", 4 for 48"–60" door height; divided doors are counted door by door
· Pre-installed connectors with interior cover caps, and assembly screws
· One-page instruction sheet
The first few inches of the blind front panel stay visible beside the door, so it’s finished to match either the door or the box — we set which at estimating.
Mounts with 3" structural screws through the back and nailers into the wall studs — no hanging rails needed. Mounting screws not included.
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door fronts always ship separately from the cabinet box — protected from damage in transit.
Standard — no upgrades needed
✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions
Make it yours
CONFIGURATION OPTIONS
+ Blind side — left or right
+ Extra adjustable shelves
+ Fixed shelves in place of adjustable
+ Divided doors at any height — fixed shelf added at the door seam
+ Finished bottom with painted cover caps
+ Under-cabinet light valance
+ Finished interior
+ Finished end panels
+ Box finish — any of our box finish selections
+ Front panel inserts — glass and more
+ Handle holes pre-drilled at set templates on door fronts — handles purchased through MJR only (drilling fee applies)
+ Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Third-party
Corner inserts depend on the cabinet’s width, depth and door opening — we confirm fit once you choose one. Availability and lead time on third-party inserts vary and are confirmed when you select one.
DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →
Not sure what you need?
Send us your project and we'll spec it for you — free.