Products → Wall Cabinets → Wall Microwave

Wall Microwave Cabinet

An open microwave opening below two doors — the shelf extends 4" past the box to carry the appliance, with storage above.

DRAG TO ROTATE · SCROLL TO ZOOM

example door style shown is the 45 degree shaker profile

STANDARD DIMENSIONS
Box 13" deep · Microwave shelf 17" deep · Opening 12" high
SIZE RANGE
Width20"–36" Height30"–72" Depth13"–18"
Microwave opening is 12" high standard — adjustable up to 24" where the cabinet height allows. Size the opening to your microwave’s specs.
Door sections over 60" automatically get divided doors, and doors can be divided at any height on request. Wherever doors are divided, a fixed shelf is added at the door seam.
Shelves in the door section scale with its height: under 24" none · 24"–29¾" one · 30"–41¾" two · 42"+ three. More can be added.
Doors are ⅛" shorter than their opening — a 1/16" reveal at the top and bottom.
CUSTOM SIZING
✓  Any size within the range above — built to your measurements
Need something outside these ranges, or a different style? We build custom all the time — ask your dealer and we’ll confirm what’s possible.
WHAT'S INCLUDED
Order it complete, as the bare cabinet box, or anything in between — your choice.
·  Two door fronts with bumper pads (four when divided)
·  Fixed microwave shelf, extended 4" past the box
·  Adjustable shelves in the door section to suit its height, 4 shelf clips per shelf
·  Blum soft-close INSERTA hinges and mounting plates, per door — 2 up to 35", 3 for 36"–47", 4 for 48"–60" door height; divided doors are counted door by door
·  Pre-installed connectors with interior cover caps, and assembly screws
·  One-page instruction sheet
The microwave opening is the cabinet box finish as standard — it can be finished in any of our door finishes on request.
Mounts with 3" structural screws through the back and nailers into the wall studs — no hanging rails needed. Mounting screws not included.
Don’t forget the assembly bit — sold separately, available with your order. One bit does every cabinet.
AVAILABLE AS
ECS flat-pack or fully assembled
Door fronts always ship separately from the cabinet box — protected from damage in transit.

Standard — no upgrades needed

✓3/4" panel construction throughout (incl. back & shelf)
✓Blum soft-close hinges
✓Pre-installed connectors
✓Adjustable shelf, micro-rounded edges
✓1mm edge banding, sealed bottoms
✓One-page assembly instructions

Make it yours

CONFIGURATION OPTIONS
+  Microwave opening height — 12" standard, up to 24"
+  Finished microwave opening — any of our door finishes (box finish standard)
+  Extra adjustable shelves
+  Fixed shelves in place of adjustable
+  Divided doors at any height — fixed shelf added at the door seam
+  Finished bottom with painted cover caps
+  Under-cabinet light valance
+  Finished interior
+  Finished end panels
+  Box finish — any of our box finish selections
+  Front panel inserts — glass and more
+  Handle holes pre-drilled at set templates on door fronts — handles purchased through MJR only (drilling fee applies)
+  Other custom options available on request
Thermofoil can be applied to most components, with some limitations depending on the application — we’ll confirm at quote.
Need an option that isn’t listed? Ask when you quote — custom options are our normal business, not an exception.
COMPATIBLE INSERTS
Third-party
Wall-cabinet inserts depend on the cabinet’s depth and height — we confirm fit once you choose one. Availability and lead time on third-party inserts vary and are confirmed when you select one.

DOOR & FINISH CHOICES
6 door profiles · painted, stained, thermofoil & melamine → Explore Finishes
Want something different? Build your own door →

Not sure what you need?

Send us your project and we'll spec it for you — free.